ATmega328P-20PU Microcontroller SKU: 28960
ATmega328P-20PU Microcontroller
$8.95 USD
This unit is a higher-capacity version of the ATmega168 – more than TWICE the flash memory for sketches (30K available instead of 14K), TWICE the RAM (2K instead of 1K), TWICE the EEPROM (1K instead of 512b)
- Maximum quantity allowed for this product: 10
In stock
Description
Update – Dec 16 2021:
Wow. 2021 supply-chain issues are making modern silicon harder to find. We’ve even had to see if we can dig up some of the original ATMega328 stock to help the hacker community, and here they are, while they last!
The Atmel AVR ATmega328 is a “fatter” brother to the very popular ATmega168P-PU, which is used as the heart of many Arduino / Freeduino SB microcontroller units. The ATmega 328 runs pretty much the same speed, with same pinout, but features more than twice the flash memory (30k vs 14k) and twice the EEPROM (1Kb vs 512b).
Flash | EEPROM | SRAM | Speed | Volts |
---|---|---|---|---|
32Kb | 1Kb | 2048B | 0-20MHz | 1.8-5.5V |
The AVR series of microcontrollers are right up there with Microchip PIC products. Powerful, inexpensive, and programmable with some very good open source software (look up GCC), with a vibrant user community.
Here are more key features:
- 28 Pin narrow DIP package (0.3″)
- 32Kb byte self-programmable Flash
- 1Kb EEPROM
- 2048 byte internal SRAM
- Two 8bit timer
- One 16bit timer
- 6 Pulse-width modulators
- 6 10-bit analog-to-digital converters (ADC)
- 2 8-bit ADCs
- USART
- SPI
- WDT
- 23-programmable I/O lines
- Has lots of other neat TLAs (three-letter acronyms)
Note: This chip is not preloaded with the Arduino firmware. |
More Info
Weight | 0.01 kg |
---|---|
Dimensions | 4 × 1 × 2 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Push Pogo Probe Holder
SKU: pph2Pogo-Pin probe holders for 1.01mm diameter pins$1.25 USDIn stock
Add to cart -
Push Pogo Pin 1 – Masher
SKU: PP1This 33mm (1.3") long masher-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Push Pogo Pin – Cone Tip
SKU: PP12-100This 33mm (1.3") long cone tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart -
Push Pogo Pin 6 – 6 Point
SKU: PP6This 33mm (1.3") long 6-groove tipped pogo pin probe is normally used for electronic JTAG uses, but we used them for bots!$1.25 USDIn stock
Add to cart
Reviews
There are no reviews yet.