Home / Parts / Displays / Graphical / 2.8" TFT Touchscreen 2.8" TFT Touchscreen SKU: 18992 2.8" TFT Touchscreen$34.95 USD Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8″ diagonal) bright (4 white-LED backlight) and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display.In stock + 2.8" TFT Touchscreen quantity $34.95 USD- Add to cart SKU: 18992 Categories: Displays, Graphical, Parts Tag: allAccounts Description Resources More Info Reviews (0) Description As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog). We wrapped up this display into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you’re going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (microSD card not included, but any will work) Specifications: 2.8″ diagonal LCD TFT display 240×320 resolution, 18-bit (262,000) color ILI9341 (datasheet) controller with built in video RAM buffer 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) – not including the touch screen. 5V compatible! Use with 3.3V or 5V logic such as an Arduino Onboard 3.3V @ 150mA LDO regulator 4 white LED backlight, transistor connected so you can PWM dim the backlight 1×20 headers for easy breadboarding 4-wire resistive touchscreen 40g Library: Full open source graphics library that can draw pixels, lines, rectangles, circles, text and full color bitmaps from an SD card. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it. Tutorial: A detailed tutorial on how to use the LCD, example Arduino library and example code. The library and example code is written for Arduino but can be easily ported to your favorite microcontroller! Resources ILI9341 DatasheetDatasheet More Info Weight 0.085 kg Dimensions 14.5 × 9.3 × 5.5 cm Count 240×320 Reviews There are no reviews yet.Only logged in customers who have purchased this product may leave a review. Related products Dual Small Spring Sensor parts bundleSKU: TACT2A pair of low-force omnidirectional tactile sensors$4.50 USD In stockAdd to cart 1000µF Electrolytic CapacitorSKU: CP1000uFAn unusually small 6.3 volt 1000uF capacitor, great for tight installations.$0.80 USD In stockAdd to cart 3300µF Electrolytic CapacitorSKU: CP3300uFA 3300µF 6.3V electrolytic capacitor is good for short-pulse solarengine circuit designs.$1.75 USD In stockAdd to cart Infrared Optical SensorSKU: IR1These infrared photodiodes are a proven light sensor in BEAM technology.$1.35 USD In stockAdd to cart 1.77mm Nickel Plated Steel Spring TubingSKU: TACT11.77mm (.07") diameter nickel plated steel spring tubing for stiffer tactile sensor designs.$0.40 USD In stockAdd to cart
There are no reviews yet.